Selleys Araldite Singles |
  |
|
|
Araldite Singles are the perfect tool for your general household repairs. Each pack contains three measured, single doses for easy application and provide the strength & reliability Araldite is known for. Available in two variants: 5 Minute Everyday or Quick Set.
|
|
|
Features
- Araldite is stronger than other glues due to the chemical reaction of the two parts
- Bonds a variety of surfaces
- Dries Clear
- Quick setting: 5 minutes for 5 Minute Everyday and 90 seconds for Quick Set
- No clamping necessary
- Moderate water resistance
- Forms a rigid, durable bond
- Can be used for gap filling (surfaces need not mate closely)
- Good chemical resistance
- Convenient pack to keep at home, work in the toolbox, anywhere you might need a quick repair!
- 3 x 1mL single serves provide a single, pre-measured dose, therefore application is easy
|
|
|
Where can this product be used?
- Perfect for most household repair jobs!
- Bakelite - joining or repairing
- Bonding shells, stones or pebbles to decorate bottles, lamps, bricks or garden pots
- Repairing splits or cracks in tennis racquet
- Repairing metal toys
- Not suitable for bonding plastics such as Polypropylene and Polyethylene (Use Selleys Plastics Glue)
|
|
|
What materials is this product suitable for?
- Glass
- Metal
- Wood
- Fabric
- Rigid Plastic
- Crystal
- Leather
|
|
|
How to use this product
Check out the 1 Minute video on the right of this page to see how easy using Araldite Singles is!
Before applying the Araldite mixture, all surfaces MUST be thoroughly clean and dry.
- All traces of grease, rust paint, etc. should be removed.
 Fold - the pack in half, so that foil is back to back.
 Tear - carefully along perforations.
 Squeeze - bubbles to extrude adhesive.
 Mix - two parts together until well combined. (tip: usethe foil pack to mix and apply)
- Apply - mixed adhesive to surfaces and bring together. Wipe off excess adhesive and do not apply undue strain to bond for 30 minutes.
|
|
|
Handy tips
- Wipe off any uncured araldite with acetone or nail polish remover.
- To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product.
- Clamping is recommended for a stronger bond.
- Singles are great for those unexpected household breakages, so keep them at home, just in case.
- For cleaning surfaces prior to application of adhesive, if the surface is porous, we would reccomend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with Methylated Spirits. If there is old difficult to remove residue such as oold paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product.
|
|
|
Safety tips
- Avoid contact with the skin and eyes.
- Avoid breathing vapour.
- Do not use solvents near eyes or open wounds.
- In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
- Non toxic when set.
- For further information refer to the Material Safety Data Sheet (MSDS).
|
|
|
|
| | | Our products may require additional tools or products for a professional completion. Here you'll find our recommendations on related products. |
|
|
|
|
|
|
|
|
|
|