Selleys Autofix Araldite |
  |
|
|
Fast-setting two-part epoxy adhesive in a handy syringe pack. The resin is light yellow, and the hardener is clear. |
|
|
Features
- Dries clear.
- Good chemical resistance.
- Rapid development of high bond strength.
|
|
|
Where can this product be used?
- Because of the very rapid cure and excellent adhesion, this product is ideal for a wide range of adhesive applications such as cracked (rigid plastic) component covers, refixing control knobs and many general adhesive applications involving metals, wood or rigid plastics.
|
|
|
What materials is this product suitable for?
- Glass
- Metal
- Wood
- Fabric
- Rigid Plastic
- Crystal
- Leather
|
|
|
Handy tips
- Maximum heat resistance 93ºC. Bond strength weakens on exposure to temperatures above 60ºC but strength is regained when temperature returns to normal.
- Not suitable for bonding common thermoplastics such as polyethylene and polypropylene.
- Not recommended for long term immersion in water.Service life in applications to very smooth surfaces exposed to weather and extreme sunlight may be limited.
- Setting time is 4 - 7 minutes.Maximum bond strength is achieved after 16 hours.
- It is best to only mix amount of adhesive required for the job as the mixed product will remain workable only for 2 - 3 minutes.
|
|
|
Safety tips
- Epoxy adhesives can cause irritation of the skin in sensitive persons.
- Avoid contact with skin and eyes and avoid breathing its vapours.
- Wear protective gloves when mixing and using.
If skin contact occurs remove contaminated clothing and wash skin thoroughly.
- If in eyes, hold eyes open, flood with water for at least 15 minutes and seek medical attention.
|
|
|