Selleys Autofix Marine Sealant |
  |
|
|
Selleys Autofix Silicone Marine Sealant is a clear, highly waterproof, acid curing silicone with good adhesion to marine materials. |
|
|
Features
- Autofix Silicone Marine Sealant maintains weatherproof seals even under the most extreme marine conditions.
|
|
|
Where can this product be used?
- The product is ideal for sealing gaps, joints, cracks and for bedding of fittings.
- Autofix Marine Sealant adheres to glass, painted and varnished wood, fibreglass, most plastics and metals (except zinc and copper).
|
|
|
What materials is this product suitable for?
- Glass
- Wood
- Fibreglass
- Most Plastics
- Most Metals
|
|
|
Handy tips
- Not suitable for below water-line seals unless used as a gasket which is held mechanically in compression.
- Not recommended for trafficable joints, such as open joints between deck planks. Will not adhere to copper, brass or zinc containing metals.
- Paint will not adhere to this sealant.
- Not suitable for contact with petrol or distillate.
- Avoid smearing of excess sealant on surfaces as this can cause problems with painting. Use masking tape for a neat appearance or where clean up is difficult. Sealant skins in 5 minutes.
- Sealant cures in 24 hours in normal applications. (If used as a gasket or adhesive up to 7 days may be required for full curing. If used to replace compression gaskets in port-hole closures, leave to cure a few days before fully tightening bolts/screws on the compression ring.)
- During application a harmless vinegar odour is generated, but disappears as sealant cures.
|
|
|
Safety tips
- WARNING: On contact, uncured sealant irritates eyes. In case of contact, flush eyes with water for at least 15 minutes and seek medical attention.
- If wearing contact lenses, take special care that lenses do not become contaminated with silicone.
Keep out of reach of children.
Remove from skin immediately with a cloth and wash with detergent and water. |
|
|