Add to Wish List

Available Sizes

Appearance

Available at**

*Actual colours may differ from screen representation.
**Not all stores range all sizes and products. Please check with the stores.

Selleys Multigrip

A strong, clear, flexible multipurpose adhesive. Ideal for repair of household items and use for craft and hobby projects.

Features

Dries Clear - No unsightly joints
Water resistant
Flexible - non-rigid bond allows some give in the joint
Fast bonding - Instant bond using contact method
An all-purpose glue which bonds most materials
Grabs in minutes - the exact 'grab time' depends on the surfaces to be joined
Interior and exterior use - can be used both outside and inside and stands up to wet weather conditions
Fast drying

Household repairs and craft/hobby use
Patching vinyl in above ground swimming pools
Repairing some plastic toys
Repairing leather goods
Repairing felt toys
Bonding labels to tins
Repairing vinyl water beds
Do not use near areas exposed to flames as it is highly flammable
Multigrip will not bond Teflon, Polyurethane, Polyethylene, Polypropylene or silicone plastics
Do not use for bonds requiring heat resistance above 90°C
Do not use foam polystyrene as it may cause damage. We recommend using Kwik Gap Waterbased for polystyrene.

Remove all dirt , dust and grease from surfaces to be joined. Unscrew cap and carefully pierce diaphragm in tube with a nail or paperclip. Replace nozzle part of cap
Squeezing gently, apply an even coating of Multigrip to both surfaces to be joined. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. (Instant bonds can be achieved with the contact method by coating both surfaces and waiting approximately 1 minute before pressing parts together firmly.)
Leave assembly undisturbed until adhesive fully dries. Approximately 10-12 hours is needed to achieve strength for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or non-porous materials are being bonded.
Replace cap firmly on tube for storage. Ensure no residue remains on thread of tube before replacing cap.
Clean up spills with acetone or nail polish remover. (Note: these are aggressive solvents and can damage some surfaces of many materials. Its effect on the material should be trialled on an inconspicuous area first.)

For very porous surfaces - apply a thin coating of adhesive to both surfaces and allow to dry (approximately 5 minutes). Apply Multigrip again and follow how to use guide.
For assistance in identifying whether your plastic item can be repaired refer to SELLEYS plastics guide.
To extend life of product always apply the cap when not in use.
For excess adhesive on hands, apply a solvent such as acetone (most nail polish removers) then wash off with soapy water followed by sorbolene cream or vegtable oil.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Hand Kleen Wipes nearby for a quick and effective cleanup.

Handle with care, highly flammable.
Intentional misuse by deliberately inhaling the vapours from this product can be harmful or fatal.
If in eyes, hold eye open, flush with water for at least 15 minutes and obtain medical attention.
If skin contact occurs, remove contaminated clothing and wash before re-use. Scrape off skin while wet. Wash with plenty of soap and water.
For further information refer to the Material Safety Data Sheet (MSDS), which can be found at this site.