Quick and Easy Adhesives

Selleys Quick Fix Liquid Stand Up Tube Supa Glue

QuickFix_Stand_Up_Tube_Single_S

Quick Fix No Mess Stand Up Tube is the Supa Smart Supa Glue. The tube controls the flow of adhesive for precise applications and will retract partly dispensed glue from the nozzle so it will never clog up and dry out between uses. The stand up feature also means you don’t end up with messy drops of glue on the benchtop!



Features

  • Free standing tube prevents leaks and retracts party dispensed glue
  • Prevents squeeze out and provides maximum application control
  • Bonds a variety of surfaces
  • Extremely fast setting, sets in 10 seconds
  • Maximum strength achieved in 12 hours
  • Dries clear for clean, neat results
  • Water resistant
  • No clamping necessary
  • Self piercing, clog free cap
  • Forms a rigid bond

Available Sizes

  • 3mL Tube

Appearance

  • Clear liquid dries to colourless film.

Available at

  • Bunnings
  • Masters
  • Mitre 10
  • Home Hardware
  • Coles
  • IGA
  • Clark Rubber
  • Selected Paint Specialists
  • Selected Auto Retail Outlets

Contact the store to confirm stock availability, as some stores may have a limited range.

Where can this product be used?

  • Ideal for small repair jobs or when immediate results are required
  • For interior projects and repairs
  • Water resistant not water proof, therefore not suitable for surfaces that will be continually wet
  • Not suitable for bonding plastics such as Polypropylene and Polyethylene
  • Not suitable for repairing items that are in direct contact with hot liquids eg saucepans
  • Will not permanently bond glass or materials containing alkaline elements
  • Has no gap filling properties therefore surfaces need to be a close fit
  • Not recommended for highly porous surfaces

What materials is this product suitable for?

  • Metals
  • China
  • Rubber
  • Leather
  • Some plastics

How to use this product

  • Supa Glue works best when the surfaces to be bonded are close fitting.
  • Surfaces to be bonded should be clean, dry and free of dust.
  • Pierce seal at end of tube by attaching nozzle and cap and turning clockwise.
  • Remove cap and apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure.
  • The product grabs within 2-30 seconds, depending on environmental conditions and materials to be bonded.
  • Allow 30 minutes for sufficient bond strength for practical use.

Handy tips

  • Supa Glue can create a white residue on the surface of a material if the area is not well ventilated. Clean the affected area with acetone (most nail polish removers) to remove residue.
  • Excellent when used with other adhesives, as the temporary tack.
  • For best results, ensure surfaces to be bonded are clean, free of dust, dry and close fitting.
  • After use, wipe excess product from the nozzle with a tissue dipped in nail polish remover.
  • For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
  • In the event that fingers get stuck together – don’t panic! Slowly twist fingers in opposite direction in hot soapy water.
  • Acetone (most nail polish removers) or Olive oil can also be used to remove Quick Fix from skin.
  • While supa glue is not recommended for use on some plastics, if your kids have broken their favourite toy, try this method: Line up the two pieces, glue it, leave it for 24 hours to dry, then drop more glue on the break area like a ‘collar’/protective layer.
  • Since Quick Fix cures with moisture set times may be extended on very dry surfaces or under dry conditions.
  • Supa glues cure more slowly when large amounts are used. For faster cure use sparingly.
  • To remove excess from materials, it is recommended that the material be soaked in a solution of acetone and water (i.e. 3 parts acetone to 1 part water). Where soaking is not possible, try placing a piece of absorbant material (eg cotton wool) soaked in acetone on the excess for 5 to 10 minutes, topping up the acetone if it evaporates. Gently rub the surface with the material to remove the residues. TEST THE SURFACE IN AN INCONSPICUOUS SPOT to ensure it is unaffected by acetone before attempting removal using this method.
  • Do not squeeze tube before removing cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurizing tube which may force material into cap, preventing a tight seal after use.
  • For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
  • Keep a canister of SELLEYS Hand Kleen Wipes nearby for a quick and effective cleanup.

Safety tips

  • Avoid contact with the skin and eyes.
  • Avoid breathing vapour.
  • Quick Fix is non-hazardous once cured. Where Quick Fix residues are on the skin, it is recommended that the skin be soaked in warm to hot water to allow easy removal. It is not advisable to try to remove the cured adhesive by pulling and scraping the skin as this will only serve to damage the skin. Alternatively rub in hand cream or vegetable oil to accelerate the natural process of the skin sloughing off to remove the residue. Where immediate adhesive removal is considered necessary apply a solvent such as acetone (nail polish remover) then wash off with soapy water. Apply hand cream to replace naturals oils in skin.
  • Do not use near eyes or open wounds.
  • In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
  • Non toxic when set.
  • For further information refer to the Material Safety Data Sheet (MSDS), which can be found at this site.

Storage and re-use

  • After use, wipe excess product from nozzle with a tissue dipped in acetone (found in some nail polish removers). Wait for a few seconds and check that no further glue is extruding before replacing cap tightly.
  • Ensure cap is replaced and store in a cool dry place.
  • For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.

Related Products

P_SelleysKwikStripSmart

Selleys Kwik Strip Smart

Selleys Kwik Strip Smart paint & varnish stripper has been specially developed to be the safer choice for interior use. This product will penetrate through multiple layers in one application...

sugar-soap

Selleys Original Sugar Soap

Selleys Original Sugar Soap is a powerful liquid household cleaner which is effective in removing grease, grime and dirt from household surfaces. It can be diluted with water or used neat. Also...

Selleys_All_Plastic_Fix_3ml_S

Selleys All Plastic Fix

Easy to use, fast setting adhesive system to repair ALL plastics.