Quick and Easy Adhesives

Selleys Quick Fix Shock Proof


Ultra-High strength supa glue that dries clear. Gives great strength as well as flexibility and heat resistance. Performance above and beyond normal Supa Glue.


  • Bonds a variety of surfaces
  • Extremely fast setting
  • Dries Clear for clean, neat results
  • Water resistant
  • No clamping necessary
  • No mixing required
  • Maximum strength achieved in 12 hours
  • Only takes 45 seconds to achieve initial bond
  • Self piercing, clog free cap
  • Forms a strong, flexible bond
  • Impact Resistant – 4 times greater impact resistance than normal supa glues
  • Superior bond on metals – up to 6 times stronger bond on steel than normal supa glue. Up to 4 times stronger bond on aluminium than normal supa glues
  • Heat Resistant to 120°C permanently, 150°C intermittently
  • Comes with nozzle for easy, accurate application

Available Sizes

  • 3mL Tube


  • Clear thick liquid dries to a colourless film.

Available at

  • Mitre 10
  • Home Hardware
  • Woolworths
  • Coles
  • IGA

Contact the store to confirm stock availability, as some stores may have a limited range.

Where can this product be used?

  • Ideal for small repair jobs or when immediate results are required
  • Fixing a broken door knocker
  • Refixing wooden or metal door handles
  • Repairing crockery safe to put in the dishwasher
  • Water resistant not water proof, therefore not suitable for surfaces that will be continually wet
  • Not suitable for bonding plastics such as Polypropylene and Polyethylene
  • Not suitable for repairing items that are in direct contact with hot liquids eg saucepans
  • Will not permanently bond glass or other materials containing alkaline elements
  • Not recommended for highly porous surfaces

What materials is this product suitable for?

  • Bonds a variety of porous and non-porous surfaces
  • Metals
  • Wood
  • China
  • Rubber
  • Leather (test first as leather may become hardened or discoloured)
  • Some plastics

How to use this product

  • Supa Glue works best when the surfaces to be bonded are close fitting.
  • Surfaces to be bonded should be clean, dry and free of dust. Refer to handy hints for cleaning tips.
  • Pierce seal at end of tube by attaching nozzle and cap and turning clockwise.
  • Remove cap and apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure.
  • Allow 12 hours for sufficient bond strength for practical use.

Handy tips

  • Supa Glue can create a white residue on the surface of a materials if the area is not well ventilated. Clean the affected area with acetone to remove (most nail polish removers) residue.
  • Excellent when used with other adhesives, as the temporary tack.
  • For best results, ensure surfaces to be bonded are clean, free of dust, dry and close fitting.
  • After use, wipe excess product from the nozzle with a tissue dipped in nail polish remover.
  • For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
  • In the event that fingers get stuck together – don’t panic! Slowly twist fingers in opposite direction in hot soapy water.
  • Acetone (most nail polish removers) or Olive oil can also be used to remove Quick Fix from skin.
  • While supa glue is not recommended for use on some plastics, if your kids have broken their favourite toy, try this method: Line up the two pieces, glue it, leave it for 24 hours to dry, then drop more glue on the break area like a ‘collar’/protective layer.
  • Since Quick Fix cures with moisture set times may be extended on very dry surfaces or under dry conditions.
  • Supa glues cure more slowly when large amounts are used. For faster cure use sparingly.
  • For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
  • Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
  • To remove excess from materials, it is recommended that the material be soaked in a solution of acetone and water (i.e. 3 parts acetone to 1 part water). Where soaking is not possible, try placing a piece of absorbant material (eg cotton wool) soaked in acetone on the excess for 5 to 10 minutes, topping up the acetone if it evaporates. Gently rub the surface with the material to remove the residues. TEST THE SURFACE IN AN INCONSPICUOUS SPOT to ensure it is unaffected by acetone before attempting removal using this method.
  • Do not squeeze tube before removing cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurizing tube which may force material into cap, preventing a tight seal after use.

Safety tips

  • Avoid contact with the skin and eyes.
  • Avoid breathing vapour.
  • Quick Fix is non-hazardous once cured. Where Quick Fix residues are on the skin, it is recommended that the skin be soaked in warm to hot water to allow easy removal. It is not advisable to try to remove the cured adhesive by pulling and scraping the skin as this will only serve to damage the skin. Alternatively rub in hand cream or vegetable oil to accelerate the natural process of the skin sloughing off to remove the residue. Where immediate adhesive removal is considered necessary apply a solvent such as acetone (nail polish remover) then wash off with soapy water. Apply hand cream to replace naturals oils in skin.
  • Do not use near eyes or open wounds.
  • In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
  • Non toxic when set.
  • For further information refer to the Material Safety Data Sheet (MSDS), which can be found at this site.

Storage and re-use

  • After use, wipe excess product from nozzle with a tissue dipped in acetone (found in some nail polish removers). Wait for a few seconds and check that no further glue is extruding before replacing cap tightly.
  • Ensure cap is replaced and store in a cool dry place.
  • For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.

Related Products


Selleys Kwik Strip Smart

Selleys Kwik Strip Smart paint & varnish stripper has been specially developed to be the safer choice for interior use. This product will penetrate through multiple layers in one application...


Selleys Original Sugar Soap

Selleys Original Sugar Soap is a powerful liquid household cleaner which is effective in removing grease, grime and dirt from household surfaces. It can be diluted with water or used neat. Also...


Selleys All Plastic Fix

Easy to use, fast setting adhesive system to repair ALL plastics.