Questions about: Rigid Fillers
What filler to repair plaster board, then use fixings for light shelving Ram toggles or anchors. John
Answer: Hi John To fill these holes you can use Polyfilla Large Cracks however we would recommend not reusing the same position for the bracket fixings as ...
Answered: 02:12AM, 03 Feb 2017
can Knead it be used to pack between terracotta urn top and base to level the top? Have screwed top to base
Answer: Hi Des Knead It should be fine for this application. It can be moulded to shape and will cure rock hard within an hour.
Answered: 01:13AM, 31 Jan 2017
Answer: Hi Michael Tradies Bog and similar fillers cannot be stained. You may be able to add a powdered oxide pigment to the Putty to try and get a colour ...
Answered: 09:13PM, 30 Nov 2016
Removed rusty dynabolts from bricks. New concrete to be laid at bricks. What to fill the holes to seal in rust
Answer: Hi Robert You can use either Knead It Epoxy Putty or a Bog Filler such as Plasti-Bond H/D Bog to fill these holes. The Knead It Aqua will be perfec...
Answered: 05:01AM, 07 Sep 2016
How soon after filling in timber with 'Spakfilla Heavy Duty' could I start sanding. If I delay, result?
Answer: Hi Daya If you do choose to use Spakfilla You will need to wait until the Spakfilla is fully dry before sanding. Drying time can vary depending on ...
Answered: 09:52PM, 18 Aug 2016