Flexible Gap Fillers

NEW Selleys Ezi Press 3 in 1 Adhesive, Sealant & Gap Filler

Selleys_Ezi-Press-3in1-white

Selleys Ezi Press 3 in 1 Adhesive, Sealant and Filler is the NEW easy to use application system that does not require a caulking gun. Simply apply at the press of a lever. Perfect for virtually any sealing, bonding and filling application and for virtually any surface.


Key Benefits

  • No caulking gun required
  • Easily applied with a press of a lever
  • Flow control for precise applicaton and finish with no run on

Features

As a Construction Adhesive

  • High strength bond
  • Water and weather resistant
  • Use on multiple surfaces

As a Sealant

  • Provides a lasting waterproof seal
  • Can be used on all indoor and outdoor surfaces
  • Paintable

As Gap Filler

  • Highly durable – no shrinkage, long lasting resistance to cracking and crumbling, water resistant
  • Can be used on all indoor and outdoor surfaces
  • Paintable

Available Sizes

  • 150g Can

Colours

  • White

Available At

  • Bunnings
  • Mitre 10

Contact the store to confirm stock availability, as some stores may have a limited range.

What materials is this product suitable for?

Perfect for excellent adhesion to most any surface including:

  • Glass
  • Metals
  • Timber
  • Brick
  • Concrete
  • Tiles
  • Most plastics (not for polyethylene, polypropylene or teflon)

How to use this product

  • Surfaces must be clean
    Ezi Press remove cap
  • Remove tab lock and nozzle cap. Twist collar clockwise towards MAX and adjust between MIN and MAX to control flow.
    Ezi Press application
  • Simply press lever gently to dispense filler to surface.

Adhesive Usage

  • Apply to 1 surface in beads (every 30cm) for broad surfaces, or dots for small surfaces.
  • Press surfaces together and allow to cure – larger/heavier items may need to be supported until adhesive cures.

Sealant Usage

  • For perfect joints, use masking tape on both sides of joint before applying into joint, smooth with a spatula dipped in soapy water.
  • Remove tape before skinning occurs.

Gap Filler Usage

  • Apply in gap and smooth off with a spatula dipped in soapy water.
  • Allow to skin before painting with water-based paint.

Ezi Press min max

  • Once finished, twist collar counter clockwise to MIN and replace nozzle cap so product won’t dry out.
  • If required, paint with water-based paints after 30-60 min.

Storage and re-use

  • Store in cool, dry conditions between +5 and +25°C.
  • After opening, the sealant should be used within 6 months.
    WARNING. May burst if heated. Pressured dispenser. Protect from sunlight and do not expose to remperatures exceeding 50°C. Do not pierce or burn can, even after use.

Clean up

  • Mineral Turpentine

Safety tips

  • Keep out of reach of children.
  • Avoid skin and eye contact with uncured product and breathing vapours.
  • Use in a well-ventilated area.
  • If in eyes, flood with water for at least 15 minutes and seek medical advice. Wash hands after use.
  • May cause skin sensitisation in sensitive individuals.
  • For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
  • For further detail on the safe use of this product, please refer to our Material Safety Data Sheet