Ready to use

Selleys Plastic Wood


Selleys Plastic Wood is a fast acting solvent based wood filling cement for use in repairing all types of woodwork in interior conditions. It is Maple timber coloured.


  • Fast setting
  • When dry, this product can be nailed, sanded, painted and lacquered
  • When dry this product can be treated in the same way as real wood

Available Sizes

  • 50g tube
  • 230g tin
  • 460g tin

Available at

  • Bunnings
  • Home Hardware
  • Mitre 10
  • Thrifty Link

Where can this product be used?

  • Repairing holes, cracks and chips in wooden surfaces
  • When dry, this product can be nailed, sanded, stained, painted and laquered
  • When dry this product can be treated in the same way as real wood
  • Not suitable for exterior conditions
  • Not recommended for use where structural movement may occur

What materials is this product suitable for?

  • Wood
  • Tmber
  • Wood veneer

How to use this product

  • Ensure surfaces are clean, dry and free of loose material.
  • Apply with a putty knife. Slightly overfill deep holes to allow for sanding. Do not fill more than 6mm in each application.
  • Allow to dry before sanding, staining or painting.
  • Replace lid firmly after use and store in a cool place.

Handy tips

  • If product has stiffened or has an oily separation layer due to extended storage, mix thoroughly. If still stiff, add a few drops of acetone or methylated spirits and again mix thoroughly. If hardened in the can discard product.
  • Clean up tools with acetone.

Safety tips

  • Product is highly flammable
  • Avoid contact with the skin and breathing the vapour
  • In case of contact with the eyes, hold eyes open and flood with water for 15 mins. Seek medical advice if irritation persists
  • For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.