Selleys Spakfilla Heavy Duty

Features

• Fills cracks and holes in a single application
• Pre-mixed so easy to use
• Suitable for interior and exterior use
• Is water and weather resistant
• Smooth and durable
• Comes complete with a filling spatula for ease of use
• Is water based, so can be cleaned up with water
• Paintable with oil and water based paints

Available Sizes

• 435g Tub

Available at

• Bunnings
• Home Hardware
• Mitre 10
• Thrifty Link
• Dulux
• Inspirations Paint & Colour
• Paint specialist stores

Where can this product be used?

• Filling cracks and holes on surfaces where no structural movement occurs
• Filling cracks and chips in walls, ceilings, doors, windows
• Repairing holes and dents in walls, ceilings, doors and windows
• Recommended for both interiors and exteriors
• Not recommended for use in temperatures under 5°C
• Not recommended for use on plastics
• Not recommended for use in wet conditions or on surfaces that are regularly underwater
• Product is not flexible so not suitable for use between surfaces that are subject the structural movement

What materials is this product suitable for?

• Plaster
• Brick
• Concrete
• Stone
• Fibro
• Timber
• Primed metal

How to use this product

• Ensure surfaces are clean, dry and free of loose material.
• Exterior surfaces should be primed before application.
• Using the flexible spatula provided on the lid, press the filler firmly into crack/hole and smooth off surface. Spakfilla Heavy Duty has minimal shrinkage – no need for excessive overfill. For deeper cracks apply in 6mm layers allowing each layer to dry before applying the next.
• Allow 2-3 hours to set in 2mm applications, in thicker applications and colder weather allow for longer drying times.
• Once completely set, Spakfilla Heavy Duty can be sanded to a feathered edge for a perfect finish.
• Paint with water or oil-based paints after applying an undercoat.

Handy tips

• Product has minimal shrinkage so there is no need for excessive overfilling
• Clean tools in water before product sets
• If filler is dry, add one teaspoon of water and mix in
• Use Poly Patching Tape to support the product when bridging larger holes.
• Sand back to a smooth finish using a Rota Cota Foam Sanding Block as the foam sponge will follow the contours of the surface
• Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.

Safety tips

• A low hazard material
• If in eyes, holds eyes open and rinse with water. Seek medical attention if irritation persists
• For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.