Sign in Join
Selleys
High Performance Sealants

Selleys MarineFlex

marine-flex

Selleys MarineFlex delivers a water proof seal for joints & gaps, even under water*. Suitable for boats, pools & spas.


MarineFlex high performance adhesive sealant can be used on boats, pools & spas, where you need a waterproof seal or bond, even under water* It can be applied & will cure under water – no need to drain your pool or spa. Compared to traditional polyurethanes it provides a more durable seal & bond with superior UV resistance.

Features

  • Salt, fresh & chlorinated water (pools/spas)^
  • Above and below waterline
  • No primer required
  • Shock absorbing & vibration dampening
  • Solvent & isocyanate free
  • Sandable when fully cured
  • Powered by Sil-X advanced polymer technology

Available Sizes

  • 410g

Colours

  • White

Available At

  • Bunnings

Contact the store to confirm stock availability, as some stores may have a limited range.

Limitations

#Not suitable for PP, PE or PTFE

*critical seals/repairs underwater should be regularly check & repaired if required. Not for polycarbonate and Perspex under water

^Gelcoat must be lightly sanded prior to product application

Where can this product be used?

  • Suitable for boats, pools & spas^

What materials is this product suitable for?

  • Metals
  • Glass
  • Ceramic tiles
  • Sealed/painted timber & concrete
  • Fibreglass
  • Gelcoat*
  • Most plastics# (pre-test before use)

SAFETY TIPS

KEEP OUT OF REACH OF CHILDREN

  • May cause an allergic skin reaction.
  • Causes serious eye irritation.
  • Avoid skin and eye contact and breathing vapours.
  • Wear protective clothing, gloves, and eye/face protection.
  • Use in a well ventilated area.
  • If medical advice is needed, have product container or label at hand.
  • IF ON SKIN: Wash with soap and water.
  • If irritation or rash occurs, seek medical advice.
  • IF IN EYES: Rinse continuously with water for several minutes.
  • Remove contact lenses if present and easy to do – continue rinsing.
  • If eye irritation persists, seek medical advise.
  • Refer to the safety data sheet. Cure product before disposal.
  • Product releases methanol duringcure.
  • 24 hour emergency response AUS 1800 033 111, NZ 0800 734 607

LIMITATIONS

#Not suitable for PP, PE or PTFE

*critical seals/repairs underwater should be regularly check & repaired if required. Not for polycarbonate and Perspex under water

^Gelcoat must be lightly sanded prior to product application