PROSERIES™ Adhesive Sealant
PROSERIES Adhesive Sealant is a one component polyurethane that is tough, fast curing and permanently elastic for flexible bonding and sealing. It has excellent adhesive and sealing properties, is weatherproof, and suitable for indoor & outdoor applications. It is sandable and paintable when cured. It is available in white and grey.
Uses
PROSERIES Adhesive Sealant is suitable for bonding and sealing common building materials such as concrete, masonry, brick, ceramic tiles, metals, soft wood, hard wood and some plastics (will not adhere to polyethylene & polypropylene – test other plastics first). Suitable for +/- 12.5% joint movement.
As an adhesive for:
- Lightweight construction materials
- Cover plates, gaskets and coverings
- Acoustic ceiling tiles
- Floor mouldings and door sills
- Wood, metal or plastic window and door frames
As a sealant for:
- Ventilation ducts, roofing, gutters and spouts
- Flexible draught proofing
- Sealing duct, pipe & other penetrations in walls or floors
- Fastened/riveted lap joints, flanges, crimped and interlocking surfaces
- Window and door perimeters
- Joints in tiled, concrete floors, parking lots
Product Range
Product Code: 9300697116956- Size & Pack Type: 410g cartridge
- Color: White
- Size & Pack Type: 410g cartridge
- Color: Grey
- Size & Pack Type: 410g cartridge
- Color: Black
- Size & Pack Type: 600ml sausage
- Color: White
- Size & Pack Type: 600ml sausage
- Color: Grey
- Size & Pack Type: 600ml sausage
- Color: Black
Technical Features
- Fast curing and non-shrinking
- Weatherproof
- Excellent adhesion
- Thixotropic (Non slumping)
- Permanently elastic over a wide range of temperatures
- Low dirt pick up
- Solvent and PVC free
- Paintable – can be painted with many water and solvent based paints (pre-testing paint is recommended).
- Undercoat with waterbased paint first.
Application Tips
- Requires atmospheric moisture to cure
- Expansion and contraction should not exceed 12.5% of average joint width
- Not recommended for continuous submersion or below water line use
- Do not apply in the presence of curing silicone sealants as cure will be affected
- Avoid contact with alcohol and other solvent cleaners during curing
- Application to substrates with high moisture can cause bubbling within the sealant
- Do not use for structural or general glazing
- Avoid air entrapment while applying sealant
- May affect drying of alkyd/oil based paints
- White sealant will yellow slightly with age and exposure to the sun
- Do not store product above 30°C
- Do not use on Polystyrene (adhesive failure)
Technical Details and Performance
Indicative information only, not to be used for setting specifications.
Appearance
Thixotropic paste
Chemical type
Polyurethane
Curing method
By reaction with moisture from the air and surrounding materials
Specific gravity
1.40Kg/L
Tack free time @ 23°C; 50% R.H
+/– 70 minutes
Curing time @ 23°C; 50% R.H
4mm/24 hours
Application temp
+5°C to +30°C
Service temp
–40°C to + 80°C
Shore A Hardness (DIN 53505)
35 – 40
Elongation @ break (DIN 53504)
+ 400%
Elastic modulus @ 100% (DIN 52455)
Approx 0.7N/mm2
Tensile strength (DIN 53504)
Approx 1.5 N/mm2
Elastic recovery (DIN EN 27389)
80%
Theoretical coverage
Length of joint (m) per cartridge = 310mL ÷ [Joint width (mm) x joint depth (mm)]
Used as a Joint sealant (Joint configuration guidelines)
- For joint widths up to 12mm
- Width/depth = 1/1 or w=d
- Minimum depth = 6mm
- For joint widths 12mm – 40mm
- Width/depth = 1/0.5 or w=2d
Related Products
Selleys Sausage Gun
Selleys Sausage Gun (38cm) is specifically designed to discharge product packaged in the commonly used cylindrical sausage packs up to 600mL in volume. Selleys Sausage Gun is ideal for...
