Kwik Grip Advanced

Uses

Kwik Grip Advanced is designed for bonding a variety of materials, both absorbent and non-absorbent, e.g. laminated plastics (laminex, formica), MDF, wood, cork, rubber, metals, leather, canvas, fibrous cement sheet and polystyrene foam. It is ideal for hobby work. As it contains no organic solvent, it is suitable for bonding materials sensitive to solvent attack, e.g. polystyrene foams.

Product Range

• Size & Pack Type: 50 ml tube
• Colour: Dries clear

• Size & Pack Type: 500 ml tub
• Colour: Dries clear

Technical Features

• Non-flammable – does NOT contain flammable solvent
• Non-toxic – safe application free of solvent fumes
• Excellent resistance to high and low temperatures
• Water resistance is good once fully cured (See Application Tips)
• Dries clear
• Can be used on damp materials (though drying time will be extended)

Application Tips

• Drying time in cold, wet (highly humid) weather may be greatly extended
• Not suitable for permanently damp or wet areas
• Not suitable for polyethylene or polypropylene
• Do not apply in temperatures below 10°C

Technical Details and Performance

Indicative information only, not to be used for setting specifications.

Appearance

Milk white liquid

Viscosity

18,000 to 20,000 centipoise (25oC)

Solids Content

Approx. 53% by weight

Heat Resistance

Up to 160oC (once fully cured)

Shear Adhesion

900kPa per 625 sq.mm. (Plywood/Cotton cloth, 24 hrs)

Kwik Grip Advanced can be used as wet bond on absorbent surfaces such as timber, cardboard etc.

Drying Time

25-40 minutes. Maximum bond strength is achieved after 24 hours. *Drying time can vary according to temperature, humidity and surfaces being bonded. When the film becomes clear the adhesive is ready for contact bonding.

Cure Time

Maximum bond strength after 24hrs (depending on conditions)

Clean Up

Clean up application tools and excess adhesive with damp cloth & water before it dries

• Kwik Grip Advanced Product Brochure
• MSDS