Epoxy Adhesives / Fillers

Araldite® Super Strength

Selleys_Araldite_Super_Strength_24ml_S

Araldite Super Strength is a two-part epoxy paste adhesive that bonds with high strength. Initial bonding achieved in 6-8 hours with maximum bond strength after 3 days.

Uses

The high strength achieved by Araldite Super Strength is ideal for tasks that require excellent strength and durability. Araldite Super Strength has excellent adhesion to a broad range of surfaces such as ceramics, glass, most rigid plastics, metals, most timber and fabric.

Product Range

Product Code: 9300697106384

  • Size & Pack Type: 24mL syringe
  • Color: Translucent

Product Code: 9300697101396

  • Size & Pack Type: 35mL tube
  • Color: Translucent

Product Code: 9300697100405

  • Size & Pack Type: 200mL tube
  • Color: Translucent

Technical Features

  • Bonds a variety of surfaces in common use
  • High shear and peel strength
  • Dries Clear
  • Very high water and weather resistance
  • Forms a rigid, durable bond
  • Gap filling
  • Good chemical resistance
  • Heat Resistant

Application Tips

For faster bond time or excellent clarity use Araldite Ultra Clear adhesive.

Heating the bond to between 40oC and 100oC while curing can increase the cure rate and final strength of Araldite Super Strength.

  • Not suitable for bonding plastics such as Polypropylene and Polyethylene
  • Note: Polypropylene and polyethylene are used in many household articles, e.g. toys.

To identify these plastics: Cut a sliver from an inconspicuous part. Hold with tweezers and burn sliver. Thermoplastics burn with a blue flame and emit an odour like a candle.

  • Bond strength weakens above 100oC but strength is regained when temperature drops

Technical Details and Performance

Indicative information only, not to be used for setting specifications.

Part A 910mL/L Liquid Epoxy Resin

Part B Hardener; 900mL/L Tertiary Amines

Mix ratio 1:1 (±5% max variation or cure affected)

Working Time

2 hours

Set Time

6 – 8 hours

Max Strength

3 days

Bond Strength (cured for 16 hrs @ 40oC)

26N/mm2 (MPa) sandblasted aluminium lap shear

Compressive Strength

46 MPa (16hrs@40oC)

Temp Resistance

100oC max

Water Resistance

6% loss in strength after 90 days water immersion at 23oC

Service Temperature

–50oC to +60oC (permanent)

Thermal Conductivity

0.22 W/mK (Cure: 20min@100oC)

Clean Up

Uncured adhesive can be cleaned up with acetone