Beginner Intermediate Advanced
2 Days

What You Need

Easy as..

  1.  If you are trying to bond the splash back to bare, timber, plaster, concrete, or brick walls, all these surfaces should be primed with a paint before bonding so as not to cause damage to the back of the mirror or splashback.
  2.  If the surfaces have been freshly painted, allow at least 3 weeks before applying adhesive to ensure there are no solvents or other products that may react with the adhesive.
  3. Clean the surfaces to be bonded using Sugar Soap Wipes to remove any grease dirt or grime. Ensure the surface is given plenty of time to dry before sticking anything to the wall.
  4. Apply the Selleys Liquid Nails Mirror, Metal and Glass adhesive allowing an edge of at least 5 cm all the way around. Apply 5mm diameter parallel beads of adhesive at 8cm intervals. Apply 3-4 strips of mounting tape in between the adhesive to hold the splash back in place while the glue dries.
  5. Firmly push the splash back on to the wall so that the mounting tape bonds and holds in place (sometimes a slightly padded mounting tape may be required).
  6. Allow at least 72 hours for the glue to fully cure and then seal around the edges using Selleys No More Gaps Bathroom and Kitchen.

Products

Selleys Original Sugar Soap

Selleys Original Sugar Soap is a professional strength and high performance formula which powers through tough grease and grime. Its also recommended for cleaning surfaces prior to painting and wallpapering.

Selleys Sugar Soap Wipes

Selleys Sugar Soap Wipes has the trusted cleaning performance of Selleys Original Sugar Soap in a quick and easy-to-use format that is ideal for removing marks and stains from painted walls and surfaces around your home.


How to Guides

How To Seal a Sink

Getting a proper seal around your sink prevents water penetration. Here’s the best way to ensure a complete seal around your sink area to make it easier to clean and less prone to water damage and discolouration. And all without the need for a caulking