Selleys Ezi Press Liquid Nails Fast is a water based high strength construction adhesive delivered in an easy to use application system that does not require a caulking gun. Simply apply at the press of a lever. Perfect for sticking materials together such as architraves and skirting.


  • No caulking gun required
  • Easily applied with a press of a lever
  • Flow control for precise application and finish with no run on
  • Strong initial grab minimises slippage when adhering on vertical surfaces and minimises the need to support joints while it cures.
  • Cleans up with water.
  • High strength
  • Paintable after 12 hours.
  • Cures and works best on porous surfaces, which makes it ideal for sticking wall panels to masonry.
  • Bridges gaps on rough and ill fitting construction material

Where can this product be used?

  • Timber panelling to walls
  • Skirting boards
  • Architraves
  • Styrene foam panels and blocks
  • Particle board to masonry surfaces
  • Tasks where nailing is not desirable.
  • Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications. 

What materials is this product suitable for?

  • MDF
  • Particleboard
  • Plasterboard
  • Cornices
  • Skirting boards
  • Architraves
  • Timber
  • Rubber
  • Glass
  • Polystyrene Foam
  • Concrete
  • Masonry
  • Tiles
  • Ceramics
  • Most plastic* - pre test plastic to determine compatibility
  • *Not for use on polyethylene, polypropylene, Teflon or silicone.

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size 130g Aerosol can
Colours Beige
Technology Water Based
Use Interior 
  1. Ensure the surfaces to be bonded are clean, dry and free from dust, grease, oil and loose powdery materials.
  2. Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense.
  3. On broad flat surfaces apply beads every 40cm, on smaller surfaces apply dots.
  4. Bring surfaces together as soon as possible (within first 5 minutes). Fix with sufficient nails, screws or clamping to hold load.
  5. Allow to set (minimum 24 hours) before removing any temporary fasteners or clamping. Use with mechanical fasteners in high stress applications. 


  • Not suitable for unsheltered exterior applications or wet areas. Use Liquid Nails® Heavy Duty
  • Avoid use in tightly clamped joints eg. Cabinet making or joinery
  • Not for use on mirrors. Use Liquid Nails® Mirror Metal & Glass
  • Not for metals heated by direct sunlight. Bonds weaken at higher temperatures. Use Liquid Nails® Mirror Metal & Glass
  • For sheet timber flooring to flat surfaces Liquid Nails® High Strength is recommended
  • Do not use as the sole bonding agent for structural bonding.
  • *Not for use on polyethylene, polypropylene, Teflon or silicone. 
  • Usually a strong bond is achieved in 24-72 hours. Expect longer times for less porous surfaces and in cold weather.
  • Paintable after 12 hours
  • *Pre test plastics to determine compatibility
  • Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning any material off before it cures. They are an easy and effective way to keep clean on the job.
  • Uncured product may be removed with water.
  • Cured product can be removed by scraping or sanding. 

Related Products

Selleys 3 in 1 Adhesive, Sealant and Gap Filler

Selleys 3 in 1 adhesive, sealant and gap filler is an extremely versatile product – It is perfect for virtually any sealing, bonding and filling applications on virtually any surface. Selleys 3 in 1 is a high strength construction adhesive, a waterproof sealant and no shrink gap filler – all in one.

How to Guides