Please contact your store to confirm avaliability, as some stores may have a limited range.
Neutral Cure Silicone
Remove any dirt or moisture between the rubber and windscreen glass. Clean with mineral turps and dry.
Pierce blind seal at end of tube. Cut and fit nozzle.
If possible, insert nozzle between rubber and glass or rubber and metal. Squeeze tube with a steady pressure, pushing the sealant ahead of the nozzle. This method will force the sealant in and smooth the surface at the same time.
If further smoothing is required, smooth before sealant skins.
After use, remove nozzle and replace with cap. Allow sealant to cure in nozzle and remove before next use.
Cannot be painted over.
Available only in black. If clear colour is required use Selleys Roof & Gutter Silicone Sealant.
Avoid smearing excess sealant on glass or paintwork. Use masking tape for a neat appearance, or where clean-up is difficult.
Uncured product may be removed with mineral turps.
Cured product can be removed by scraping or cutting.
No information is currently available for this product
D-MASTIC is an oil based sealant that forms a skin on exposure to air but remains soft underneath. Designed for sealing windscreens in cars, boats, trucks, and buses, and for metal lap joints in white goods, caravans, bus and truck bodies.