Selleys No More Gaps Ezi Press Multipurpose is ready to use. Simply press the lever to apply - no caulking gun required. High flex gap filler with a smooth finish, superior flexibility and low shrinkage to resist reappearance of cracks.


  • No caulking gun required
  • Easily applied with a press of a lever
  • Flow control for precise application and finish with no run on
  • Superior flexibility to cope with building movement
  • Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
  • Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 3 hours after application).
  • Is formulated for long term resistance to cracking and crumbling.
  • Water clean-up
  • Will not stain building materials.
  • Has good resistance to weathering.

Where can this product be used?

  • Between window and door frames and the wall
  • Along skirting boards
  • Around cornices
  • Between benchtops and tiles which are not exposed to water. 
  • In corners or between walls & ceilings.
  • Between cabinets and cupboards.
  • Around air conditioning vents and the ceiling.
  • Where shrinkage or movement has caused rigid fillers to crack.
  • Gaps with the maximum width of 25mm and depth of 12mm.

What materials is this product suitable for?

  • Timber
  • Brick
  • Concrete
  • Plasterboard
  • Particle board
  • Fibre cement sheeting
  • Masonry
  • Ceramic Tiles
  • Glass
  • Aluminium

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size 170g Aerosol can
Colours White
Technology Water Based
Use Interior
  1. Ensure surfaces are clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
  2. Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense.
  3. Smooth with wet spatula. Clean up with water. Twist collar back to MIN and replace nozzle cap.
  4. Allow 3 hours before painting. Allow longer in colder weather or for solvent-based paints.


  • Is not recommended where significant joint movement occurs, such as gaps between tongue and groove boards or weatherboard overlaps and areas of continuous water immersion eg ponds.
  • Is not suitable for application at below 5°C.
  • Not suitable for Wet Areas. Use Selleys Wet Area Ezi Press to seal in wet areas.  
  • For a neat finish and easy clean up, tape both sides of the gap before applying the product. 
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler, and a perfect finish.
  • If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
  • Allow 3 hours before painting. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
  • Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack.
  • Some water based under coats and flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
  • Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning any material off before it cures. They are an easy and effective way to keep clean on the job.
  • Uncured product may be removed with water.
  • Cured product can be removed by scraping or sanding. 

Related Products

Selleys Mortar Works

Selleys Mortar Works is a textured, mortar like gap filler which allows easy repair of unsightly cracks and gaps in brickwork around the home. Available in a range of colours.

Selleys No More Gaps Coloured Caulk

Selleys No More Gaps Coloured Caulk is a flexible gap filler available in a range of modern colours, to fill those unsightly gaps and cracks around the home and take away the need to paint.

How to Guides