Selleys Permafilla is versatile ready mixed filler, ideal for interior and exterior applications. It has excellent adhesion to mortar, brick, stone, concrete, timber, plaster and primed metal.

Features

  • Fills cracks and holes in a single application
  • Pre-mixed so easy to use
  • Suitable for interior and exterior use
  • Water and weather resistant
  • Smooth and durable
  • Water based, so can be cleaned up with water
  • Paintable with oil and water based paints
  • Sandable
  • Good adhesion to many surfaces

Where can this product be used?

  • Suitable for deep and wide cracks in mortar, concrete, timber, plaster and primed metal

What materials is this product suitable for?

  • Plaster
  • Brick
  • Concrete
  • Stone
  • Mortar
  • Timber
  • Primed metal

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size 230g Tub
  450g Tub 
  1kg  Tub 
Colours White
Technology Water Based
Use Interior
  Exterior 
  1. Ensure surfaces are clean, dry and free of loose material.
  2. Exterior surfaces should be primed before application.
  3. Using a flexible filling knife, press the filler firmly into crack/hole and smooth off surface. Permafilla has minimal shrinkage - no need for excessive overfill. For deeper cracks apply in 6mm layers allowing each layer to dry before applying the next.
  4. Allow 2-3 hours to set in 2mm applications, in thicker applications and colder weather allow for longer drying times.
  5. Once completely set, Permafilla can be sanded to a feathered edge for a perfect finish.
  6. Paint with water or oil-based paints after applying an undercoat.

        Limitations:

  • Not recommended for use in temperatures under 5°C
  • Not recommended for use on plastics
  • Not recommended for use in wet conditions or on surfaces that are regularly underwater
  • Product is not flexible so not suitable for use between surfaces that are subject the structural movement
  • Product has minimal shrinkage so there is no need for excessive overfilling
  • Clean tools in water before product sets
  • If filler is dry, add one teaspoon of water and mix in
  • Use patching tape to support the product when bridging larger holes.
  • Sand back to a smooth finish using a sanding block
  • Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.
  • Uncured product may be removed with water.
  • Cured product can be removed by sanding and scraping.

 


Related Products


How to Guides