Spakfilla One Shot is a ready to use all in one multipurpose interior filler and scraper. Perfect for quick repairs around the home that only require a small amount of filler. Specifically designed as a single application, it requires no tools or experience.

Features

  • Easy to apply - just cut, squeeze and scrape
  • Single use - no wastage*
  • Less mess - simply throw away once job's completed
  • Perfect for interior small dents, chips and hairline cracks in plasterboard
  • Fills up to 10x small holes and hairline cracks
  • *Each pack contains enough product for a small job- product is not designed to be recapped after use, and if left, contents may dry out.

Where can this product be used?

  • Filling interior small dents, chips, holes and hairline cracks 

What materials is this product suitable for?

  • Plaster
  • Plasterboard
  • Wallboard
  • Timber
  • Masonry
  • Primed metal

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size  20g Pack
Colours White
Technology Water Based
Use Interior
  1. Remove unit from blister card.
  2. Un-clip backing scraper, cut top tab off the Spakfilla Oneshot unit, re-clip backing scraper back on.
  3. Squeeze pack and use the inbuilt scraper to apply filler into the crack or hole and scrape off excess.
  4. Allow filler to dry (2 hours for thin applications), lightly sand and paint surface as required. For best results, undercoat before applying top coat.

        Limitations:

  • Avoid using below 5°C or in wet conditions.
  • Product is not flexible so not suitable for use between surfaces that are subject the structural movement. Use Selleys No More Gaps.

 

  • If clean up is required wipe with a wet cloth before product sets.
  • For applications more than 2mm deep, or in cold or humid conditions, expect longer drying times.
  • When painting with oil based paints filler must be completely dry (at least 24 hours).
  • Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
  • Uncured product may be removed with water.
  • Cured product can be removed by sanding and scraping.

 

 


Related Products


How to Guides