Selleys Roof & Gutter Ezi Press is easy to use – simply press the lever to apply – no caulking gun required. It provides a superior waterproof seal and excellent UV and weather resistance. Ideal for roofing, guttering and flashing outside the home. 


  • No caulking gun required
  • Easy to hold and use
  • Superior waterproof seal
  • 100% silicone - resists cracking, crumbling or peeling away
  • UV and weather resistant
  • Precision application for the best finish

Where can this product be used?

  • Metal and tile roofing
  • Colorbond roofs and fences
  • Guttering and flashings
  • Skylights
  • Around air conditioning units

What materials is this product suitable for?

  • Aluminium
  • Sheet Metal
  • Copper
  • Brass
  • Galvanised Metals
  • Rigid PVC and most plastics including polystyrene
  • Terracotta
  • Concrete
  • Glazed tiles
  • BlueScope Steel decorative sheet metals such as Lysaght Zincalume and COLORBOND

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size 100g Aerosal
Colours Translucent
Technology Neutral Cure Silicone
Use  Interior 

Use in a well ventilated are. Avoid contact with skin and eyes.

  1. Throughly clean and dry surface from oil, dirt and grease with mineral turps. 
  2. Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense. 
  3. Smooth with a spatula dipped in soapy water. Clean up before sealant skins (5-10 minutes) with a cloth dampened in mineral turps. Twist collar back to MIN and replace nozzle cap
  4. Sealant will fully cure in 72 hours


• Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
• Do not use in below ground applications. 
• Sealant is not paintable. Complete painting 7d prior to applying sealant. 

  • Covers up to 4m, depending on bead size/shape
  • For a neat finish and easy clean up, tape both sides of the gap before applying the product. 
  • Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface, may result so working in sections allows for a better finish.
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
  • For a better finish use a spatula dipped in mineral turps or soapy water to tool off the sealant.
  • Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures.
  • Uncured product may be removed with mineral turps. 
  • Cured product can be removed with Selleys Silicone Remover or by cutting and scraping. 

Related Products

Selleys ArmourFlex

Selleys ArmourFlex provides superior strength with instant grab and more flexibility than conventional adhesive/sealants.

How to Guides