Selleys STORM Sealant delivers a waterproof seal on any material*, wet or dry, indoor or outdoor. It can even be applied in the rain to stop leaks in an instant.

Features

  • Can be applied to wet or dry material*
  • Good adhesion on any material* even when applied in the rain
  • Excellent UV and weather resistance
  • Suitable for interior and exterior use
  • Long lasting flexibility
  • Easily paintable with 2 coats of water-based paints
  • Low odour
  • Made with Sil-X, an advanced polymer technology which delivers superior performance in demanding situations where conventional products fail, on any material* wet or dry.

Where can this product be used?

  • Sky lights
  • Gutters
  • Down pipes
  • Windows

What materials is this product suitable for?

  • Concrete
  • Timber
  • Metals
  • Cement sheeting
  • Brick
  • Plasterboard
  • Ceramic tiles
  • Fibreglass
  • All construction substrates
  • Most plastics*
  • *Not for PE, PP, PTFE, permanent water immersion or plugging leaks subject to pressure. Forms an instant seal, but must not be disturbed until cured (approx. 48 hours).

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size 290ml cartridge
Colours Black
  Clear 
Technology Sil-X®
Use Interior 
  Exterior 

  

  1.  Ensure substrates are clean and free of oil, grease or loose particles.
  2.  Cut cartridge tip, fit to nozzle and cut to size (5mm), then place in caulking gun.
  3.  Apply with the caulking gun, pushing sealant into joint or gaps.
  4.  Smooth off using a spatula dipped in turps, within 5 minutes of applying. If painting, paint with two coats of a quality water-based exterior paint.

        Limitations:

  • *Not for PE, PP, PTFE, permanent water immersion or plugging leaks subject to pressure. Forms an instant seal, but must not be disturbed until cured (approx. 48 hours). 
  • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
  • Paint with water-based paint. If paint does not wet out sealant surface properly, lightly sand sealant before painting.
  • A minimum of two coats are necessary to ensure proper wetting out the sealant surface
  •  

  • Clean up with mineral turps before Storm cures.
  • Cured sealant can be removed by scraping or sanding or with the help of Selleys Silicone Remover. 

Related Products

Selleys ArmourFlex

Selleys ArmourFlex provides superior strength with instant grab and more flexibility than conventional adhesive/sealants.


How to Guides