Selleys Wet Area Ezi Press is ready to use – simply press the lever to apply – no caulking gun required. It provides a superior waterproof seal and resistance to unsightly mould. Ideal for wet areas like bathrooms and kitchens.


  • No caulking gun required
  • Easy to hold and use
  • Superior waterproof seal
  • 100% silicone - resists cracking, crumbling or peeling away
  • Mould resistant
  • Precision application for the best finish

Where can this product be used?

  • Showers
  • Baths
  • Spas
  • Sinks
  • Metal, copper and brass plumbing Fixtures

What materials is this product suitable for?

  • Ceramic, glazed and porcelain fixtures
  • Metal, copper and brass fittings
  • Powder coated aluminium
  • Aluminium
  • Plastic laminates
  • Rubber
  • Glass
  • Stainless steel
  • Concrete


Please contact your store to confirm avaliability, as some stores may have a limited range.

Size 100g Aerosol can
Colours White
Technology Neutral Cure Silicone
Use  Interior 

Use in a well ventilated area. Avoid contact with skin and eyes.
1. Throughly clean and dry surface from oil, dirt and grease with mineral turps.
2. Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense.
3. Smooth with a spatula dipped in soapy water. Clean up before sealant skins (5-10 minutes) with a cloth dampened in mineral turps. Twist collar back to MIN and replace nozzle cap
4. Sealant will fully cure in 72 hours


• Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
• Sealant is not paintable.Complete painting 7days  prior to applying sealant. 
• Not for aquariums or contact with food, eating utensils or drinking water. 


  • For a neat finish and easy clean up, tape both sides of the gap before applying the product.
  • Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
  • For a better finish use a spatula dipped in mineral turps or soapy water to tool off the sealant.
  • Keep sealant cleaned regularly to avoid build-up of soap scum. Use Selleys Soap Scum Buster or Selleys Rapid Mould Killer
  • Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures.
  • Uncured product may be removed with mineral turps.
  • Cured product can be removed with Selleys Silicone Remover or by cutting and scraping. 



Related Products

Selleys Butyl Mastic

Selleys Butyl Mastic is a synthetic resin, butyl rubber based mastic which forms a smooth tough skin, but remains permanently plastic underneath.

Selleys FlameFlex

Selleys FlameFlex High Performance Sealant can be used for construction joints & gaps where a fire rated seal is specified*.

How to Guides