Selleys Ezi Press 3 in 1 Adhesive, Sealant and Gap Filler

Selleys 3 in 1 Ezi Press is ready to use – simply press the lever to apply – no caulking gun required. It is perfect for virtually any sealing, bonding and filling applications on virtually any surface. Selleys 3 in 1 is a high strength construction adhesive, a waterproof sealant and no shrink gap filler – all in one. Ideal for sealing, bonding and filling almost any material, damp or dry, inside or outside, providing durable waterproof seals, strong bonds and a perfect paintable finish. Excellent adhesion to almost any surface, including glass, metals, timber, brick, concrete, tiles and most plastics*

Features

No caulking gun required
Easily applied with a press of a lever
Flow control for precise application and finish with no run on
Excellent adhesion
Waterproof and weather resistant
No shrinking
No cracking
UV Resistant
*Not for polyethylene, polypropylene or teflon

Safety Data Sheet

Product Details
How to Use
Handy tips
Clean Up
Videos

Where can this product be used?

Use 3 in 1 for sealing, bonding and filling almost any material
damp or dry
inside or outside
Provides a durable waterproof seal
Provides strong bonds and a perfect paintable finish

What materials is this product suitable for?

Glass
Metals
Timber
Brick
Concrete
Tiles
Most plastics (not for polyethylene, polypropylene or teflon)

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size	150g Aerosol can
Colours	White
Technology	Sil-X®
Use	Interior
	Exterior

Surfaces must be clean
Remove tab lock and nozzle cap. Twist collar clockwise towards MAX and adjust between MIN and MAX to control flow.
Simply press lever gently to dispense product to surface.
Once finished, twist collar counter clockwise to MIN and replace nozzle cap so product won't dry out.
If required, paint with water-based paints after 30-60 min.

Adhesive Usage

Apply to 1 surface in beads (every 30cm) for broad surfaces, or dots for small surfaces.
Press surfaces together and allow to cure – larger/heavier items may need to be supported until adhesive cures.

Sealant Usage

Apply product, ensuring it is forced into the joint, with good contact to surfaces. Tool with a soap solution before skinning occurs.

Gap Filler Usage

Apply product into gap and smooth off with a spatula dipped in soapy water.
Allow to skin before painting with water-based paint.

Limitations:

Not recommended for solvent based paints. If required, paint with a water based paint first.

Store in cool, dry conditions below +5°C and +25°C.
For neater joints, mask sides before applying sealant and remove tape before sealant skins.
Larger, heavier items need to be supported until the adhesive cures.
Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning any material off before it cures. They are an easy and effective way to keep clean on the job.

Uncured product may be removed with mineral turps.
Cured product can be removed by scraping or sanding or with the help
of Selleys Silicone Remover.

Related Products

Selleys 3 in 1 Adhesive, Sealant and Gap Filler

Selleys 3 in 1 adhesive, sealant and gap filler is an extremely versatile product – It is perfect for virtually any sealing, bonding and filling applications on virtually any surface. Selleys 3 in 1 is a high strength construction adhesive, a waterproof sealant and no shrink gap filler – all in one.