Liquid Nails Mirror & Metal

Features

  • Non-corrosive on mirrors
  • High strength
  • Moisture and heat resistant
  • Neutral cure adhesive
  • Easy to apply

Important Information

  • Specially formulated for safe mirror installation
  • Will not de-silver mirror backing
  • Suitable for interior and exterior use
  • Excellent adhesion to smooth, non-porous surfaces
Share

Downloads




  • Technical Details
  • Limitations
  • Directions For Use

Exterior

Cure Time

7 days (full strength)

Paintability

No

Colour

White

Strength

High strength, flexible bond

Suitable Materials

Mirror

Metal

Glass

Tiles

Ceramics

Indoor/Outdoor Use

Indoor

Outdoor

Application Temperature

5°C to 35°C

Service Temperature

-20°C to 100°C

Water Resistance

Excellent

Technology

Neutral cure silicone

  • Not suitable for polyethylene, polypropylene, or Teflon®
  • Not suitable for aquariums or below-waterline applications
  • Must be applied to one surface only when bonding mirrors
  1. Ensure surfaces are clean, dry, and free of dust or oils.
  2. Cut cartridge tip, screw on nozzle, and load into caulking gun.
  3. Apply vertical beads to the back of the mirror.
  4. Immediately press mirror into position with adequate support.
  5. Do not cover adhesive with tape or sealants until fully cured.
  6. Allow 7 days for full cure.
  7. Clean up uncured adhesive with mineral turps or a silicone remover.

Product Range

About Liquid Nails

Durable and versatile, contact adhesives are great for bonding large, flat surfaces together, but can also be used for smaller patch and repair jobs. Most can be used on a variety of materials such as timber, leather, canvas, rubber, and cork, while a few are also suitable for bonding metals, glass, and certain plastics.

About Liquid Nails