Knead It Multipurpose

Features

  • Hand-kneadable epoxy repair system
  • Fast setting
  • Will not sag, run or drip
  • Can be drilled, sanded, machined and painted after cure
  • Heat resistant up to 120°C continuous
  • Suitable for underwater repairs after full cure

Important Information

  • Wear gloves when handling
  • Set time increases below 20°C
  • Mix thoroughly until uniform colour
Share

Downloads



  • Technical Details
  • Limitations
  • Directions For Use
Technology

Epoxy

Working time

Approx. 3–5 minutes

Initial Cure

Approx. 60 minutes

Full Cure

Approx. 24 hours

Suitable Substrates

Timber

Metal

Masonry

Ceramics

Glass

Some plastics (not PE/PP)

  • Does not adhere to polyethylene, polypropylene or PTFE
  • Not suitable for joints subject to movement
  • Not intended for structural applications
  1. Ensure surface is clean and roughened.
  2. Cut required amount and knead until uniform colour.
  3. Apply within working time.
  4. Smooth with damp cloth if required.
  5. After approx. 60 minutes it can be drilled or sanded.

Product Range