Auto Fix Marine Sealant

Features

  • Cures to a tough, flexible, waterproof seal
  • UV resistant
  • Water and weather resistant
  • Salt spray resistant
  • Detergent resistant
  • Vibration resistant
  • Resists temperatures approx. −60°C to +180°C continuously, to +240°C intermittently

Important Information

  • Translucent marine sealant
  • Neutral curing silicone with good adhesion to marine materials
Clear
Share

Downloads


  • Technical Details
  • Limitations
  • Directions For Use
Can be used for

Sealing gaps

Joints and cracks

Bedding of fittings

Windows and hatches

Lock, nuts bolts and plates to prevent vibration

Seals and waterproofs electrical connections

Binds and repairs most marine materials

Suitable for use on

Glass

Painted/varnished wood

Fibreglass,

Most plastics

Most metals (doesn’t adhere to copper, brass or zinc metals)

  • #Not suitable for polycarbonate, polyethylene or polypropylene plastics
  • Sealant cannot be painted over
  • Not suitable for below water-line seals unless used as a gasket which is held mechanically in compression
  • Not recommended for trafficable joints, such as open joints between deck planks
  • *Will not adhere to copper, brass or zinc containing metals
  • Not suitable for contact with petrol or distillate
  1. Clean surfaces with mineral turps and dry.
  2. Pierce seal in tube and fit nozzle.
  3. Extrude sealant with steady pressure into joint or surface.
  4. For adhesive or gasket use, apply to one surface and mate within 3 minutes.
  5. Tool to smooth finish with spatula dipped in detergent water.
  6. Clean before sealant cures with mineral turps.
  7. Replace cap after use to prevent curing in nozzle.

Product Range