Pro Trade Joint Sealant FC
Features
- Fast‑curing polyurethane adhesive & sealant
- High flexibility with ±25% joint movement
- Excellent adhesion and weatherproofing
- Waterproof once cured
- Paintable after cure
Important Information
- Suitable for outdoor and indoor joints, vertical & horizontal, including trafficable joints
- Colours: White, Grey, Black; available in cartridges and sausages
- Must be applied on sound, clean, dry, and properly prepared surfaces
Downloads
- Technical Details
- Limitations
- Directions For Use
Technology |
Polyurethane adhesive & sealant |
Colours |
White Grey Black |
Density |
1.08 ±0.03 g/mL |
Application Temp |
5‑40°C |
Tack‑Free Time |
~40 ±10 minutes (23°C / 50% RH) |
Cure Rate |
≥3mm / 24h |
Sag |
0mm (EN ISO 7390) |
Tensile Strength |
~2.0‑2.5 N/mm² |
Elongation at Break |
≥ 400% |
Shore A Hardness |
~40 ±5 |
Service Temperature |
–40°C to +70°C |
- Not for continuous submersion or below‑water‑line use
- Will not adhere properly to PE or PP; test other plastics before use
- Do not apply on frozen or wet surfaces
- Clean surfaces thoroughly (remove dirt, oil, release agents, loose material).
- Cut nozzle; load cartridge or sausage into gun; pierce seal if needed.
- Insert backing rod if required; mask edges if neat finish is desired.
- Extrude sealant ensuring full side contact; avoid trapping air.
- Tool bead for smooth finish.
- Paint with water‑based paints once cured; use primer if applying oil‑based paint.
- Clean uncured sealant with mineral turps; remove cured product mechanically.
Product Range
Pro Trade Construction Adhesive Fast Grip
- High initial grab
- Water-based
- No drip/sag/stringing
Pro Trade Construction Adhesive Multipurpose
- High strength bond
- Fast cure but not too quick skin formation
- Water resistant
Pro Trade Wet Area Silicone
- 100% neutral cure silicone
- Mould & mildew resistant
- ±25% joint movement
Pro Trade All Purpose
- 100% neutral cure silicone
- Weather & UV resistant
- Mould & mildew resistant
Pro Trade Roof & Gutter Silicone
- Neutral cure silicone
- 25-year guarantee
- UV and weather resistant
Pro Trade Joint Sealant LM
- High flexibility (±25% joint movement)
- Excellent resistance to weathering and ageing
- Non‑slumping, cures bubble‑free
Pro Trade Joint Sealant FC
- Fast‑curing polyurethane adhesive & sealant
- High flexibility with ±25% joint movement
- Excellent adhesion and weatherproofing
Pro Trade Glass Silicone
- 100% neutral cure silicone
- Excellent adhesion to glass & metals
- Weather and UV resistant
Pro Trade Gap Filler Fast Skin
- Paint over in 10 minutes
- Skins in ~6 minutes
- High-solids formula for low shrinkage
Pro Trade Gap Filler Smooth Finish
- Paintable in ~30 minutes
- High-solids formula for low shrinkage
- Thick consistency for smooth gunning
Pro Trade Expanding Foam
- Expands to three times its original volume
- Suitable for interior & exterior use (when painted)
- Will not shrink
Share
Share this Product with your friends