Flexiseal FC Multipurpose Sealant and Adhesive
Features
- Fast curing
- High bond strength
- Primerless adhesion
- Indoor & outdoor use
- Paintable after cure
Important Information
- Can be used both as adhesive and sealant
- Not suitable for PE, PP, PTFE and some plastics—test first
- Waterproof, but not for permanent immersion or below water line use
Downloads
- Technical Details
- Limitations
- Directions For Use
Technology |
Polyurethane adhesive & sealant |
Joint movement capability |
±25% |
Colours |
White, Grey, Black |
Size |
310 ml cartridge; 600 ml sausage (varies by colour) |
- Will not adhere to PE, PP, PTFE
- Some colour fade / discolouration may occur under UV (colours may discolour after exposure)
- Not intended for structural load or continuous submersion
- Ensure surfaces are clean, dry, free of grease, dust, loose material.
- As Separator: Apply bead or blobs, clamp surfaces until cured. Remove excess immediately.
- As Sealant: Extrude into joint ensuring full side contact; don’t trap air. Use a backing-rod in deeper joints. Smooth off with spatula.
- Allow time to cure. Initial bond takes ~24 hours; full strength develops over days.
Selleys ProSeries Flexiseal
- High flexibility with ±25% joint movement
- Non-slumping, low modulus
- Excellent adhesion to common building materials
Selleys Flexiseal FC Multi Purpose Sealant and Adhesive
- Fast curing
- High bond strength
- Primerless adhesion
About Construction Sealants
Share
Share this Product with your friends