If you want to refresh your bathroom by updating your bathroom accessories but are nervous about drilling into tiles, here is a solution using Selleys Hold Up!

Kara shows us how to install a beautiful jewellery holder to tiles in no time, and best of all, no drilling required.

Beginner Intermediate Advanced
1 Hour

What You Need

How To

Step 1: Using the pencil, mark out where you want the accessory to go



Step 2: Make sure the surfaces are clean and dust free, give them a quick wipe with a clean cloth

Step 3: Pull cap off Selleys Hold Up tube, unscrew nozzle and pierce membrane with the tip of the nozzle. Replace nozzle and cut along the second ridge

Step 4: Cover the surface of the accessory to be installed with HOLD UP in vertical strips. 



HINT: Its crucial that the accessory has a nice, flat back to sit flush against the wall 

Step 5: After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads

TIP: Selleys Hold Up is adjustable for 15 mins so you can get whatever your sticking nice and straight. 

Step 6: Clean any excess up with mineral turpentine and leave for 48 hours to fully cure.


Selleys Hold Up

Selleys Hold Up makes mounting, bonding and sticking tasks easier! Forget screws, nails or clamps.

Selleys No Mould Silicone Sealant

Selleys No Mould Silicone sealant creates a long-lasting waterproof seal that prevents mould growth. Suitable for use in humid and damp environments, it’s ideal for kitchens, bathrooms, laundries, showers, tiles and plumbing fixtures. For interior use only. *Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours) *To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth *Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility. Suitable for - Ceramic, Glazed & porcelain fixtures, Aluminium, Plastic laminates, Some rubbers, Glass, Stainless Steel

How to Guides