Selleys Oven Plus Heavy Duty Gel

1. Ensure room is well ventilated and wear rubber gloves and eye protection.
2. Use in a warm oven. Preheat oven to no more than 90°C. Do not overheat as surfaces may be affected. Switch off oven, open door, and allow to stand for 10 minutes before applying product to warm oven surfaces.
3. Shake well before use. Can be applied by squeezing and spreading with the brush-head or by first squeezing onto a dry sponge and then applying.
4. Apply thin gel layer as directed below. Let stand for 30 minutes, before wiping with a damp cloth eg. Use a non-scratch scourer for stubborn sections. Then immediately rinse surfaces thoroughly.
   Oven Surfaces:Remove racks. Apply onto back wall, then side-walls, then floor. Then apply to roof by squeezing onto a dry sponge and applying. Finish with door. Place folded paper towels between bottom of door and oven floor. Close door to prevent seepage.
   Oven Racks:Lay newspaper on draining board. Squeeze gel onto newspaper and dab bristles in gel. Hold up racks vertically on draining board and apply by running bristles along bars. Place racks back in oven.
   Cookware/Bakeware:Wipe surfaces dry immediately after rinsing. After cleaning carbon steel or cast iron, oil surfaces to help prevent flash rusting.

Limitations

• Not suitable for self or continuous cleaning ovens.
• Check oven manufacturer's directions before using the oven cleaner.
• Do not use Oven Plus Heavy Duty Gel on pilot lights, electrical connections, switches, heating elements, thermostats, rubber seals, exterior oven surfaces, bench tops, aluminium, copper, Linoleum, painted surfaces, plastic, glass, chrome or galvanised steel or damaged/scratched ‘non-stick’ cookware/bakeware.
• Carbon steel and cast iron surfaces must be oiled after cleaning to avoid flash rusting.

• Use in a warm oven.
• Use a non-scratch scourer for stubborn sections.
• Brush-head provided is for spreading gel - not meant for scouring.
• Cookware and bakeware surfaces need to be thoroughly rinsed after cleaning to remove any residue.

Let stand for 30 minutes before wiping with a damp cloth e.g. Selleys Super Cloth. Use a non-scratch scourer for stubborn sections. Then immediately rinse surfaces thoroughly.