Point Works Accelerant Spray

Features

  • Accelerates Selleys Point Works cure
  • Fast setting for urgent jobs
  • Easy aerosol application

Important Information

  • Use only with Selleys Point Works
  • Apply lightly; avoid overspray
  • Ensure proper ventilation
Clear
Share

Downloads



  • Technical Details
  • Limitations
  • Directions For Use
Technology

Technology: Curing accelerator for polyurethane

Skin Time

Accelerates to ~5 minutes (with Point Works)

Cure Time

Speeds up full cure to ~6–8 hours

Movement Capability

N/A (used in combination)

Paintability

Yes (once sealant is cured)

Mould and UV Resistance

N/A

Application Temperature Range

5°C to 35°C

Service Temperature Range

N/A

Suitable Substrates

Used to accelerate curing of Selleys Point Works

Clean Up

Solvent

  • Do not use with other sealants. 
  •  Avoid direct contact with skin and eyes
  1.  Apply Selleys Point Works as usual.
  2.  Lightly spray Accelerant over the bead from ~30cm away.
  3.  Avoid puddling or heavy application.
  4. Allow to cure – typically skin forms in ~5 minutes, full cure in 6–8 hours.

Product Range

About Selleys Point Works

Selleys Point Works is a water based product and hence the water in it must evaporate before it will harden. Although 2 hours drying in good weather is sufficient for the product to develop a skin that will resist light rain, in cold and wet conditions drying time is greatly extended and it may take some days before Selleys Point Works is resistant to persistent or heavy rain. A fast surface skin, resistance to light / showery rain, can be achieved by spraying the pointing surface lightly with Selleys Point Works Accelerant Spray immediately after pointing.

About Selleys Point Works