Pro Trade Gap Filler Fast Skin

Features

  • Paint over in 10 minutes
  • Skins in ~6 minutes
  • High-solids formula for low shrinkage
  • Thick consistency for smooth gun application
  • Excellent adhesion to timber, plasterboard, masonry and aluminium
  • 80% elongation

Important Information

  • Suitable for gaps around ceiling cornices, door/window frames, skirting boards
  • Water-based acrylic technology
  • For best result, apply to clean, dry surfaces and avoid excessive joint movement
White
Share

Downloads



  • Technical Details
  • Limitations
  • Directions For Use
Technology

Water-based acrylic

Skin time

~6 minutes

Paintable

In about 10 minutes

Movement capability

±10%

Typical size/colour

White, 475 g cartridge

  • Not suitable for joints with large structural movement beyond ±10%
  • Application temperature must be above ~10 °C
  • For interior use; exterior performance depends on paint finish and protection
  1. Prepare surface: clean, dry, and free from dust, grease and loose material.
  2. Load cartridge into caulking gun, cut nozzle to desired size.
  3. Extrude filler into gap, ensure adequate fill but avoid over-filling.
  4. Allow skin to form (~6 minutes), lightly sand if necessary.
  5. Once skinned/firm, you may paint after ~10 minutes.
  6. Clean tools and excess while product is still wet.

Product Range