Knead It Aqua
Features
- Designed for wet and underwater repairs
- Will not sag, run or drip
- Can be drilled, sanded and painted after cure
- Heat resistant to 120°C continuous
Important Information
- Suitable for damp, wet or submerged surfaces
- Roughen surface for best adhesion
- Set time increases below 20°C
Downloads
- Technical Details
- Limitations
- Directions For Use
Technology |
Epoxy |
Working time |
Approx. 20–30 minutes |
Initial Set |
Approx. 60 minutes |
Full Cure |
Approx. 24 hours |
Suitable Substrates |
Glass Ceramics Masonry Metal Timber Fibreglass Some plastics (not PE/PP) |
- Does not adhere to polyethylene, polypropylene or PTFE
- Not suitable for flexible joints
- Cut required amount and knead until uniform colour.
- Apply within working time.
- Press firmly into repair area.
- Smooth before hardening.
- Allow full cure before machining or painting.
Product Range
Knead It Multi Purpose
- Hand-kneadable epoxy repair system
- Fast setting
- Will not sag, run or drip
Knead It Aqua
- Designed for wet and underwater repairs
- Will not sag, run or drip
- Can be drilled, sanded and painted after cure
Knead It Steel
- Hand kneadable, fast setting epoxy repair system
- Industrial strength
- Adheres to metal and other surfaces
Knead It Auto Fix
- Fast setting co-extruded epoxy repair system
- Reshapes, rebuilds and repairs auto parts
- Will not sag, run or drip
Fireproof Cement
- Resists intense heat
- Sets hard
- Water clean up
N-Mastic
- Non-skinning polybutene compound
- Remains permanently soft and paste-like
- Good adhesion
Tradie's Bog
- Easy to sand
- Strong adhesion
- Sets hard in 20 mins
Plasti-Bond Heavy Duty
- Strong adhesion
- Sets in 20 mins
- No shrink or crack
Special Putty
- Easy to use. Apply by hand or with a putty knife
- Superior linseed oil–based putty
- Exceptional keeping qualities
Plastic Wood
- Fast setting
- Sets hard
- Can be sanded, nailed, planed, painted or lacquered when dry
Share
Share this Product with your friends