Selleys Pro Trade Joint Sealant FC

Features

  • Fast‑curing polyurethane adhesive & sealant
  • High flexibility with ±25% joint movement
  • Excellent adhesion and weatherproofing
  • Waterproof once cured
  • Paintable after cure

Important Information

  • Suitable for outdoor and indoor joints, vertical & horizontal, including trafficable joints
  • Colours: White, Grey, Black; available in cartridges and sausages
  • Must be applied on sound, clean, dry, and properly prepared surfaces
Black
Grey
White
Share

Downloads



  • Technical Details
  • Limitations
  • Directions For Use
Technology

Polyurethane adhesive & sealant

Colours

White

Grey

Black

Density

1.08 ±0.03 g/mL

Application Temp

5‑40°C

Tack‑Free Time

~40 ±10 minutes (23°C / 50% RH)

Cure Rate

≥3mm / 24h

Sag

0mm (EN ISO 7390)

Tensile Strength

~2.0‑2.5 N/mm²

Elongation at Break

≥ 400%

Shore A Hardness

~40 ±5

Service Temperature

–40°C to +70°C

  • Not for continuous submersion or below‑water‑line use
  • Will not adhere properly to PE or PP; test other plastics before use
  • Do not apply on frozen or wet surfaces
  1. Clean surfaces thoroughly (remove dirt, oil, release agents, loose material).
  2. Cut nozzle; load cartridge or sausage into gun; pierce seal if needed.
  3. Insert backing rod if required; mask edges if neat finish is desired.
  4. Extrude sealant ensuring full side contact; avoid trapping air.
  5. Tool bead for smooth finish.
  6. Paint with water‑based paints once cured; use primer if applying oil‑based paint.
  7. Clean uncured sealant with mineral turps; remove cured product mechanically.

Product Range