Silicone 401 RTV
Features
- One component, ready to use acid cure silicone
- Primerless adhesion
- Permanently flexible
- Operating temperature range -60°C to 205°C (260°C intermittent)
- Good resistance to most organic and inorganic chemicals, solvents and oils
Important Information
- Developed for form-in-place gaskets and adhesive sealing
- Suitable for electrical insulating applications in manufacturing and maintenance
- Suitable for most metal, glass, ceramic, some rigid plastics, painted and wood substrates
Downloads
- Technical Details
- Limitations
- Directions For Use
Technology |
Acetic cure silicone |
Colour |
Clear |
Skin Time |
5 minutes |
Cure Rate |
3mm per 24 hours |
Shore A Hardness |
23 |
Elongation at Break |
400% |
Elastic Recovery |
100% |
Service Temperature |
-60°C to +205°C (260°C intermittent) |
- Not recommended for use with petrol, distillate and some hydrocarbon solvents
- Do not use in totally confined joints where not exposed to atmospheric moisture
- Chemical compatibility should be tested
- Cannot be over-painted
- Use in well ventilated area.
- Ensure surface is clean and dry.
- Cut cartridge and nozzle. Apply with cartridge gun.
- For adhesive/gasketing: apply and mate surfaces before skin forms.
- For joint sealing: tool immediately and remove masking before skin forms.
- Clean uncured product with mineral turps.
- Store below 27°C.
Range of Sealants
White For Life Silicone Sealant
- 100% silicone sealant
- Waterproof seal
- Mould resistance#
Fix & Go Bathroom & Kitchen
- Watertight seal
- Sanitary grade silicone
- Mould resistant
All Clear
- Multipurpose sealant
- Works on wet, oily and dirty surfaces
- Crystal clear finish
Paint Over Sealant
- Paintable in 1 hour*
- Suitable for gloss, semi gloss and low sheen paints
- Paintable with water & oil-based paints
401 Silicone
- One component, ready to use acid cure silicone
- Primerless adhesion
- Permanently flexible
Brick & Concrete Silicone
- Superior waterproof seal
- Highly flexible ±50% joint movement
- Neutral cure formula
Flame Flex
- Fire rated up to 4 hours (AS1530.4)
- Complies with BCA acoustic requirements
- No primer required
Glass Silicone
- 100% silicone formulation
- UV and weather resistant
- Superior adhesion to glass and glazing surfaces
Sealant Remover
- Fast acting; works in 10 minutes
- Sticks vertically
- Suitable for silicone, acrylic, SMP/hybrid and polyurethane sealants
Share
Share this Product with your friends